How to adjust the heating temperature at home?

For users who use radiators at home, if the outdoor temperature is not too cold in each heating season, the thermostat on the boiler can be adjusted to 45 degrees to 55 degrees. When the outdoor temperature is below zero, we should set the thermostat to a high point, which can be adjusted to 60 to 65 degrees.

If the temperature on the thermostat is too low at below zero, the water pump will keep turning, but the house will not be warm, because the radiator will dissipate heat too quickly, and the water will become 30 degrees or even lower for the long-distance circulation at home.

For users who use floor heating at home, don't adjust the temperature too high. The suitable temperature is 40 to 50 degrees. Because if the temperature on the thermostat is adjusted too high, it is easy to scale the floor heating pipe, and too high temperature will also affect the service life of the floor heating pipe.

Pay attention to use

1. The boiler thermostat has working temperature adjustment and high temperature protection. When the temperature is lower than a certain set point, such as 75 degrees, it will burn a big fire. When it exceeds 75 degrees, it will burn a small fire and stop at 85 degrees. If the temperature of the small fire is not enough, you can raise the set temperature, for example, to 80 degrees, and you can turn on the small fire. For the adjustment method, see the temperature controller manual or the boiler user manual.

2. If the flame load is too small, such as only 30%, the boiler supplier or burner supplier should increase it, such as 50%, or even 60% or 70%. Users are not advised to adjust the flame by themselves. Because it involves the adjustment of gas volume and air volume, there will be potential safety hazards and energy waste if the adjustment is not good. It is difficult to judge whether the gas boiler is in the best state by visual inspection, so it needs to be debugged with a flue gas tester.