Where is the throttle installed?

The throttle valve is installed at the position connecting the air cleaner and the cylinder block. The following is some introduction about throttle valve: 1. Throttle is the most important component in today's EFI automobile engine system. Its upper part is the air filter, and the lower part is the engine block, which is the throat of the automobile engine. 2. The throttle valve is slightly cylindrical, and there is a disk rotating around the axis in the center of the cylinder. With the rotation of the disc, the cross section of air circulation in the cylinder will be controlled, thus controlling the flow of mixed gas. Extended content: 1. Throttle is a controllable valve that controls air to enter the engine. After the air enters the intake pipe, it will be mixed with gasoline to form a combustible mixture, which will be successfully formed after combustion. 2. There are two kinds of throttles: traditional cable throttle and electronic throttle. The traditional engine throttle control mechanism works through a cable or a pull rod, with one end connected to the throttle pedal and the other end connected to the throttle linkage plate. The electronic throttle mainly uses the throttle position sensor to control the throttle opening according to the energy required by the engine, so as to adjust the intake air.