Peugeot Initializes 307 Windows, Keys and Throttle

Peugeot 307 window regulator vehicle remote key and throttle related initialization steps are as follows.

First, the window regulator is initialized as follows.

First, turn on the vehicle instrument power supply or start the vehicle.

Then lower the window regulator to the bottom and hold it for 5 to 6 seconds. Raise the window regulator to the top again and hold it for 5 to 6 seconds. Under normal circumstances, the window regulator is initialized.

Repeat the corresponding operation steps one by one to initialize all windows normally.

The second initialization step related to throttling.

Turn the ignition switch to the "on" position and wait for 30 seconds, then turn it to the "OFF" position and wait for 30 seconds. Turn the ignition switch to the "on" position again and press the accelerator pedal hard. Turn the ignition switch to the "off" position, wait for 30 seconds, then turn it to the "on" position and release the accelerator pedal.

Thirdly, the related initialization steps of vehicle remote controller.

Insert key (stop position)

2. Press and hold the lock key on the key and turn it to the running position for more than 10 second.

3. Screw back to the stop position and pull it out.

Remote car lock, test successful.