How to clean 07 Sidi car air conditioner?

Cleaning method of 07 Sidi automobile air conditioner:

First, use air conditioning cleaning agent to clean automobile air conditioning:

1, in general, there is a pollen filter at the air inlet of the automobile air conditioner, which is used to prevent external dust from entering when the automobile air conditioner is externally circulated.

2. When cleaning the air conditioner, remove the pollen filter, spray the air conditioner foam cleaning agent from the air inlet, and close the air conditioner outlet to prevent the foam cleaning agent from flowing out of the air outlet.

3. After these two steps are completed, start the car, turn on the air conditioner, and let the foam cleaning agent circulate inside the air conditioning system. This step will last for several minutes to ensure that the foam cleaning agent circulates to all channels of the air conditioning system. About 5 minutes, turn off the air conditioner and turn off the car. It won't take long for the dust to flow out of the cabinet from the air conditioning piping system.

Second, remove and clean the car air conditioner:

1 first, you have to take the dashboard apart and take out the evaporator of the air conditioner. The evaporator of an air conditioner that has not been cleaned for a long time must be covered with dirt and small Mao Mao, so it must be carefully cleaned with a brush.

2. This step is completed. Reinstall the air conditioner and wash it again in the first way.

3, open the storage box to find the condenser, increase air cooling, spray cleaning agent. If you think the air conditioner stinks, you can wash it yourself. This is actually not difficult.

4. Buy a foam cleaning disinfectant: a bottle of "air conditioner cleaner for family car".

5. Get ready for work, find a place with fresh air (remember to clean the air, because the back of the air-conditioning partition should be removed), open the front cover, take out the air-conditioning partition at the air inlet in front of the passenger seat, open all the windows, and prepare a cloth to wipe the air outlet.

6. Start cleaning: ignite, turn off the air conditioner, use external circulation, and the maximum air volume is 4 speeds. Remember that the wind should be blown against the driver (that is, don't blow against the feet), then insert the cleaning agent into the catheter, and shake it hard at the air inlet in front of the co-pilot to spray foam (you can spray the whole bottle by yourself). At this time, pay attention to the foam sprayed from the air outlet and be ready to dry it with a cloth at any time.

7. Turn on the wind after completing the above steps, leave it alone, let it blow for about 10 to 15 minutes, then turn off the wind, turn off the fire, let the dirty water leak out of the drain pipe under the car, and wait for a few minutes.

8. After a few minutes, there is a large area of sewage underground, indicating that the air conditioning cleaning has been completed. The air conditioner partition will be installed and the air conditioner will be turned on. The air from the air conditioner is delicious.