How does Toyota Reiz throttle match?

Toyota Reiz throttle matching methods are: 1, turn off the ignition switch and wait at least 10 second. 2. Loosen the accelerator pedal completely, turn the ignition switch to the on position and wait for 3 seconds. 3. Quickly repeat the following operations for 5 times within 5 seconds, completely press the accelerator pedal and completely release the accelerator pedal. 4. Wait for 7 seconds, fully press the accelerator pedal, and keep this state for about 20 seconds until the MIL stops flashing and starts to light up. Extended content: Throttle is the throat of automobile engine, and it is a controllable valve to control air to enter the engine. The depth of stepping on the accelerator is directly related to the opening of the accelerator, so the performance of idle speed (engine revolutions) and power (speed increase) is closely related to the cleanliness of the accelerator. Generally speaking, the throttle valve is a valve that controls air to enter the engine. After air enters the intake pipe, it will mix with fuel to form combustible gas and burn.