Basket weaving manual course

Tools needed for basket weaving: a pair of scissors. Material: paper rattan. Dosage: 6 pieces are 30cm long, 1 piece is 4m long. The manual process of basket weaving is as follows:

1. Divide six 30cm-long paper vines into two parts and place them as shown in the figure below. Just put two groups of paper vines together. Step 2: Fold the 4-meter-long crutch in half and find the middle position. As shown in the figure below, it is nested in six arranged shafts. Just order three, and just start with three.

2. After each winding, cross the two windings used for winding. We call the lower part six axes, and the upper part winding is called winding. I can't express some steps in words, so you should be able to see clearly when you look at the picture. Clockwise or counterclockwise, depending on whether you are comfortable or not. Just keep repeating these steps.

We always have to go around twice. After winding twice, divide all three wire groups into one wire group and continue winding. The same steps. Look at the pictures. Because it has changed from three axes to one axis, it should be tightened when winding, so it is easy to leave a gap here.

4. After running many laps, it looks like the picture below. When the bypass diameter is 4 cm, this diameter is not fixed! You can wind as you like, but as the diameter increases, the length of your corresponding shaft and winding will also increase. Go around to the right height, when you feel almost the same. Or when winding is almost finished, directly fold the winding and insert it into the gap just wound.