Taishun throttling resistor processing factory

There are many factors that cause the vehicle to have no response and only idle when stepping on the accelerator. It is possible that the throttle valve is damaged, the throttle line is faulty, and other sensors such as the air flow meter are in poor contact. As soon as the owner stepped on the accelerator and didn't respond, he had to call the trailer or road rescue service for help and go to the 4s shop or repair shop to find a professional to check and repair.

As soon as the accelerator pedal is stepped on, the cable will drive the accelerator. There is a position sensor on the accelerator, and the control unit knows the opening of the accelerator and then calculates the fuel injection quantity of the vehicle. If there is something wrong with the throttle position sensor, it will cause the throttle to fail, and there is no response when stepping on the throttle.

It is very likely that the accelerator pedal is damaged, the resistance contact inside the accelerator pedal is poor, and the motor of the electronic accelerator sensor may fail. These problems cannot be solved by the owners themselves. You need to go to a 4s shop or a repair shop to find a professional to investigate the cause and then repair it.

When the owner steps on the accelerator, don't feel like stepping on the accelerator pedal as much as you want, and be careful with the accelerator pedal. Step on the accelerator hard and lightly, lift it slowly, and step lightly. When starting the engine, don't step on the accelerator pedal to the end, just a little higher than the idle accelerator. Do you have time to start refueling now? It should be better before the linkage point of the clutch, preferably with a small throttle or a medium throttle.