What about sagitar throttle oil leakage?

If there is continuous oil leakage in the Pacific automobile network and there are signs of gradual oil leakage, you should go to the repair shop as soon as possible. In general, oil leakage is not serious. The treatment method is to clean up the oil on the surface of the gearbox, and then apply sealant to the oil leakage point. If the situation is serious, the oil pan will be removed and replaced with a new seal.

There are many cases of gearbox oil leakage, such as aging seals, bad driving habits, assembly technology or quality of gearbox oil seal, bad working conditions of gearbox and great load change.

Because the structural design of the gearbox is very compact, the degree of reinforcement is very high. In practical work, the internal temperature is very high, which makes the gearbox oil produce steam and fill the box space, which leads to the pressure rise in the box. All sealing sections bear the impact of this pressure, and oil and gas often rush out at the weakest place, resulting in leakage.

Don't be too alarmed if the gearbox leaks oil. The first step is to judge whether it is oil leakage or oil leakage. Some oil spills are discontinuous, so as long as they are not serious, they can be ignored first. The vehicle is running normally, but pay more attention to the oil leakage.

Under normal circumstances, the automatic gearbox needs oil change and maintenance every 2 years or 40,000 to 60,000 kilometers. Otherwise, long-term use may lead to overheating of gearbox oil temperature, poor lubrication between gearbox gears, gearbox slipping and slow gear shifting. In addition, during vehicle operation, frequent high-speed operation or rapid acceleration will also lead to an increase in the oil temperature of the gearbox and increase the probability of oil leakage in the gearbox.

If there is continuous oil leakage and there are signs of gradual oil leakage, you should go to the repair shop as soon as possible. Under normal circumstances, the oil leakage is not serious. The treatment method is to clean up the oil stains on the surface of the gearbox, and then apply sealant to the oil leakage point. If the situation is serious, the oil pan will be removed and replaced with a new seal.

Generally speaking, for minor oil leakage, most of them will be pasted with new sealing materials. When the reducer is overhauled, D05 silicone rubber sealant is coated on the joint surface and the end cover to replace the early products, so there is generally no leakage. If the static sealing point leaks oil during the operation of the reducer, it can be blocked with the oil surface emergency repair agent of surface engineering technology to achieve the purpose of eliminating oil leakage.

When the car travels 50,000 kilometers, turn on the power supply of the equipment car, then connect the cold-cut pipe equipped with the transmission with the matching connector, and then when the engine is idling, add shift cleaning agent and brake with your foot, so that all gears of the automatic transmission can automatically remove harmful substances, and then disassemble the equipment and completely replace the automatic transmission oil. Finally, the protective agent and the old automatic transmission leak-proof agent are added to the automatic transmission to restore the aging of the transmission and prevent leakage.

Discharging the paint film and other deposits in the system can avoid new pollution liquid, restore the elasticity of the oil seal and gasket of automatic transmission, enhance the sealing performance, prevent the leakage of automatic transmission, improve the performance of ATF liquid and prolong the life of ATF and automatic transmission.