Why do you need to clean the throttle regularly?

Why do you need to clean the throttle regularly?

Cleaning of strong throttle system

Effectively remove the carbon deposit and colloid attached to the combustion chamber, throttle valve and intake manifold, and make the oil-gas mixing ratio return to normal. Improve combustion, reduce fuel consumption, increase effective engine power and stabilize idle speed. Harmless to sensors and three-way catalysis, and non-corrosive to metal and rubber products. An effective protective film is produced on the inner wall of the air intake system to ensure the normal operation of all components and reduce fuel consumption.

1, what is the throttle?

Throttle is the valve that controls the intake of the engine, and the mechanism that controls it is under your right foot-throttle. The deeper you step on the accelerator, the greater the throttle opening, the more air intake of the engine, the more complete oil and gas combustion and the stronger the power.

2. How is carbon deposition formed?

Every time the cylinder works, it injects oil first and then ignites. When we put out the engine, the ignition device was cut off immediately. However, the gasoline sprayed by this working cycle cannot be recovered and can only be attached to the intake valve and the combustion chamber wall. Gasoline volatilizes easily, but the wax and gum in gasoline will stay. In the long run, the wax and gum in gasoline become thicker and thicker, and carbon deposits are formed after repeated heating.

3. What is the effect of carbon deposition on the throttle?

Throttle is a piece of metal in a circular tube, and carbon deposits are attached to this piece of metal, which makes the metal thicker, the air in and out is not smooth, and even the throttle is not closed seriously. This has caused problems such as weak acceleration and engine jitter.

4. How often is the throttle valve washed?

There are no phenomena such as unstable idle speed, engine jitter, obvious increase in fuel consumption, and weak acceleration, so there is no need to clean! It is not too late to clean after the above situation. Carbon deposition is a slow accumulation process, and there will be no serious failure directly, so pay attention to the condition of the car and repair it in time if there is any problem.

5. How to wash the throttle?

There are two ways to clean the throttle: disassembly and cleaning and disassembly-free. Generally, the air intake and throttle valve are cleaned by hanging bottles, without disassembly and cleaning. When the engine is running, the cleaner is continuously sprayed through the air inlet, but the effect is relatively general. Disassembly and washing need to remove the intake assembly and scrub the throttle valve with chemicals, which is effective but troublesome. Be sure to reset the throttle opening after cleaning, otherwise it may cause the alarm lamp to alarm, because the ECU computer of the car has memorized the opening when there is carbon deposit. If it is not reset, it is actually the same as when it is not cleaned, so remember this.

Five Functions of Daily Regular Cleaning

1, which can effectively clean and dredge the glue and carbon deposit of the fuel nozzle and keep the fuel system clean.

2. Reduce tail gas emission and save fuel, thus effectively protecting the oxygen sensor and the three-way catalytic converter.

3. It can help prevent symptoms such as knocking, unstable idle speed and poor acceleration caused by colloid and carbon deposition.

4. It can eliminate the carbon deposit on the valve seat, lubricate the valve and valve guide, improve the sealing performance, restore the cylinder pressure and increase the power.

5. It can remove the carbon deposit in the combustion chamber, lubricate the upper area of the cylinder, reduce the wear of the piston ring and prolong the service life.