How to change the thermostat of Jiangnan tt

1. First remove the fan, unplug the hose of the water storage tank, and remove the two fixing screws of the fan and the connector of the fan.

2. Determine the position of the thermostat.

3. Prepare the socket and long wrench.

4, loosen the screw, be careful not to let the screw fall in the gap, when falling in the gap with a magnet. Loosen the screw, and you can loosen it with a little force on the thermostat.

Exhaust: Manual exhaust is not required for those who bring back water pipes on the kettle (there are two pipes on the kettle, and the thin tube on it is return pipe). Those who don't bring back the water pipe need to be manually exhausted, and the exhaust position is the highest point of the water pipe. Most radiators have an exhaust port above the water tank. The specific operation is: open the exhaust port, start the engine, and after the idle speed is stable, the oil filler will quickly let the water temperature rise until the antifreeze flows out of the exhaust port, that is, the exhaust is completed.