Clean the throttle yourself. Toyota is dazzling.

Toyota Zhixuan throttle is not recommended to be completely deleted. Because the throttle position is not easy to operate, it is best to remove the hose connecting the air filter and the throttle and clean it directly. But for the cleaning effect, you can also take more effort to remove the throttle for cleaning.

Throttle cleaning method:

1. Open the engine compartment, connect the air filter to the throttle valve and connect it to the engine block. To clean the throttle, first remove the intake pipe.

2. The intake pipe is generally fastened with screws. After loosening the screw, you can remove it by pulling your hands back. Be careful, don't pull hard, or the hose will be easily damaged. You can try to twist left and right at the same time, and then push back hard after the whole body is loose.

3. After the intake pipe is removed, the throttle valve can be seen at this time. The outside of the throttle is generally not dirty, but the inside is really dirty. We need to power up the vehicle but it won't stop. Another person will step on the accelerator pedal to open the throttle, so that we can see the inside of the throttle.

4. Why not completely remove the throttle for cleaning? As can be seen from the figure, there are other parts near the throttle. If you want to dismantle it, it is likely to be done in other parts, so friends who don't have the ability and tools to do it, it is best to clean it directly.

5, throttle cleaning should use special throttle cleaner. Install the cleaning nozzle and aim at the inside of the throttle valve for injection. After spraying in place, wipe with cotton cloth.

6. If you insist on removing the throttle, loosen the screws around the throttle with tools, and be careful not to drop the screws into the engine room.

7. After removing the screws, the throttle can be removed. Then you can clean the inside and outside of the throttle, and install it in reverse according to the disassembly steps after cleaning.