How to install the accelerator cable of Dongfeng Junfeng freight car

The installation steps of the throttle cable of Dongfeng Junfeng freight car are as follows:

1, the traditional cable throttle is connected with the accelerator pedal at one end and the accelerator at the other end through a steel wire, and its transmission ratio is 1: 1, that is to say, the opening angle of the accelerator is how much we step on with our feet, but in many cases, the throttle should not be opened at such a large angle, so the opening angle of the throttle at this time is not necessarily the most scientific. Although this method is very direct, it is very scientific.

2. The electronic throttle controls the opening of the throttle through cable or wire harness. On the surface, the traditional throttle cable is replaced by cable, but in essence it is not only a simple change of connection mode, but an automatic control function for the power output of the whole vehicle.

3. If you replace the accelerator cable, you should replace it in a 4S shop or a professional repair shop, because it will affect the idle speed of the vehicle engine. If the adjustment is not good, it will lead to engine idling instability and flameout.