How to adjust the pressure and height of Suunto ambit GPS watch?

Methods of adjusting the air pressure and height of SUUNTO Songtuo AMBIT3 watch;

Altitude barometer:

In altitude air pressure mode, you can view the current altitude or air pressure. In time mode, click Next to view Alti &；; Air pressure (altimeter and barometer) display.

Can you show it in the start menu? Under the altimeter, show/hide the display screen of altimeter. Use [Next] to switch.

Depending on the mode activated when [View] is pressed, you can enter different views.

There are three modes: automatic, barometer and altimeter.

If GPS is activated, sunrise and sunset time views are available. If GPS is not activated, the sunrise and sunset times will be based on the last recorded GPS data.

1, using altimeter mode:

Altimeter mode calculates the altitude according to the reference value. The reference value can be a sea level pressure value or a height reference value. When the altimeter mode is activated, the altimeter icon will be displayed on the display.

When the altimeter mode is activated, you can enter the following views:

Top row: current height

Midline: the elevation change map of the past 24 hours, with the recording interval of 15 minutes.

Bottom line: Use View to switch the display of time, temperature, sunrise/sunset or sea level pressure reference values.

The altitude reference value is alti &；; The latest altitude value used in BARO (altimeter and barometer) mode.

2. Use barometer mode:

The height value set as the height reference value, or the latest height recorded in automatic mode before switching to barometer mode.

Note: If you wear Suunto Ambit3 Peak on your wrist, you need to take it off to get an accurate temperature reading, because body temperature will affect the initial reading.

Set the sea level pressure value and altitude reference value:

1. Press [Next] to enter the options menu.

2. Use [Light Lock] to scroll to ALTI-BARO, and then use.

[Next] Enter.

3. Use [light lock] to scroll to the reference, and then use.

[Next] Enter.

4. The following setting options are provided:

FusedAlti:GPS is turned on, and the watch begins to calculate the height according to fused alti.

Manual Height: Set the height manually.

Sea level pressure: Set the sea level pressure parameter manually.

Test value.

5. Use [Start/Stop] and [Light Lock] to set the reference value. Use [Next]

Accept the settings.