Chasing g20 inversion jitter

Clutch slipping, clutch matching gearbox. Excessive lubrication-causes the clutch plate to wear.

The reason why the car will shake when reversing may be that the carbon deposit in the injector is seriously blocked. It is recommended to clean the throttle. In addition, problems such as dirty spark plugs and air filters, carbon deposition and grease blockage will cause the car to shake when reversing, and related accessories can be cleaned and need improvement.

Nozzle blockage: gum in gasoline will block the nozzle hole, resulting in inconsistent fuel injection quantity of each nozzle, inconsistent operation of each cylinder and engine jitter. The solution is to take it away and clean it.

There is something wrong with the spark plug: the spark plug has a long service life, and the ignition efficiency will obviously decrease after exceeding 30,000-40,000 kilometers, which will affect the ignition. This is the most common fault, just replace all spark plugs.

Dirty air filter: The air filter is designed to protect the engine from wear and tear, and it is usually replaced after driving about 65,438+00,000 kilometers. If it is not replaced in time, the engine will shake due to insufficient air intake, so it can be solved by replacing the filter element.

Carbon deposition and grease blockage: Throttle, idle valve and air inlet will be blocked by carbon deposition and grease after a period of use, and the air inlet will be blocked, which will affect the idle stability and jitter. It can be solved by checking and cleaning the above parts with cleaning agent without disassembly and cleaning.

In addition, when the vehicle is engaged in reverse gear, it is necessary to engage in reverse gear after the vehicle stops, because it is actually necessary to change the direction of power when the vehicle is engaged in reverse gear. If you don't stop, you will inevitably enter reverse gear.