Clean the throttle and spray the plastic pipe on the engine.

If it is determined that the plastic pipe is inhaled by the engine, it is dangerous. If it falls outside the engine, it will be fine. Because if it is sucked into the intake pipe by the engine, it will be bad, because the plastic pipe will get stuck in the valve or cylinder. But if there is nothing unusual, it may be that the high temperature of the engine works to melt the plastic pipe, because the combustion temperature in the engine cylinder can reach several thousand degrees. In this way, the oil is mixed with the plastic. If it is cooled, the plastic will solidify and continue to move inside the engine. It is recommended to run the engine hot for a long time and then change the oil immediately. I have done so much so far. Disassembling the engine is not practical because the cost will be extremely high. And most stores don't like to take this job. There is no profit.