Handmade crochet pendant tutorial

Handmade crochet pendant tutorial is as follows:

Preparation materials: small brush, a glass of water, paper towel, palette, adhesive tape, nails, hammer or screwdriver, three colors of pigments, wooden knobs and threaded nails.

1, open the paint box, mix different colors freely, or use them alternately. First of all, I suggest you start with simple colors.

2. Mark the part to be colored with a pencil, and paste the tape to divide the area.

3. Dig out a little pigment from the end of a small brush and put it in the palette, and change the color by adding water or mixing it with other colors. After digging out one pigment, clean the small brush, continue to dig out the second color and mix them.

4. When you make the color you are satisfied with, you can start coloring. Mix the pigments evenly with a brush and dip them thoroughly.

5. Color according to the area marked by yourself.

6. Put the colored knob aside and rinse the brush with clean water.

7. After the pigment is dried, remove the adhesive tape.

8. Screw the threaded nail (actually matched with the knob) behind the knob until it is completely fixed.

9. Cut a small hole in the wall with a hammer and a moderately sized nail, or directly use an electric screwdriver to make a hole.

10. You can hang your favorite jewelry or clothes by fixing the wall hook on the wall.

1 1. After skilled operation, you can make wall hooks of various colors and styles, and you can choose gradient, pop, stripes and geometric patterns.

Matters needing attention in making small pendants:

Safety first: pay attention to safety in the production process to avoid accidental injuries. Especially when using scissors, lighters and other tools that may bring safety risks, you must use them carefully.

Choose the right material: choose the right material according to the type of pendant you plan to make. If you plan to make a metal pendant, you need to choose a suitable metal material; If you plan to make a crystal pendant, you need to choose a crystal material with holes.

Preparation of making tools: according to the type of pendant to be made, prepare corresponding tools, such as scissors, lighters, glue, etc. If you are not familiar with the use of these tools, it is recommended to operate under the guidance of professionals.