What happened to the three lights of Volkswagen tire pressure anti-skid abs?

This situation occurs because the abnormal tire pressure of automobile tires leads to the disorder of the internal code of the electronic control device, and there is a fault. You can use the diagnostic instrument to read the fault code or go directly to the 4s shop to find a professional to repair it. In this case, it is very dangerous not to continue driving.

There are two situations when the steering wheel light, anti-skid light and tire pressure monitoring light are on.

First, the tire pressure is deflated, resulting in a wheel speed difference. Similarly, the system will also judge that the other wheel is slipping and the steering wheel is off, so these lights will be on.

Second, the engine throttle is dirty. Because the power output of the engine is not proportional to the torque of the vehicle transmission, the fault code of the chassis will be reported. It is recommended to find a tire shop to balance the tire pressure before checking the throttle. If it is found to be dirty, it can be cleaned in time.

The reason why the anti-skid light is always on.

1. The close button of ESP was pressed by mistake.

2. The sensor connector is loose or invalid.

3. The line is short-circuited or the related fuse is blown.

4. Software problems lead to poor signal transmission.

5, ABS pump body failure.