How to Clean Modern Tucson Throttle Brand-new Tucson Throttle Cleaning Method

A brand-new cleaning method of Tucson throttle: clamp the hose buckle with a vise, pull out two water pipes on the throttle, and the throttle will be completely removed. The back is being cleaned. As there was no accelerator cleaner at hand, we switched to asphalt cleaner. Still very useful. Spray the cleaning agent on the dirty place a few times first, and after half a minute, wipe it off with a paper towel after the sludge and carbon deposit melt.

Throttle is a controllable valve that controls air to enter the engine. After the air enters the intake pipe, it will be mixed with gasoline to form a combustible mixture, which will be burned to do work. It is connected with the air filter at the top and the engine block at the bottom, and is called the throat of the automobile engine. Throttle is the most important component in today's EFI automobile engine system. Its upper part is the air filter, and the lower part is the engine body, which is the throat of the automobile engine. Whether the acceleration of a car is flexible is closely related to the cleanliness of the throttle.

When cleaning the throttle valve, it is not necessary to disassemble it, but the sealed part of the inlet steam must be cleaned, and the idling motor must be disassembled before cleaning. Borrowing and cleaning syringes has advantages and disadvantages. It is generally recommended that the maintenance station should not disassemble and clean to prevent other unnecessary waste, such as the need to replace the sealing ring or install other gaskets after disassembly, or the phenomenon of oil leakage during disassembly and assembly, which will delay the owner's time.