How to keep the air pressure of air compressor between 0.5-0.6Mpa

Keeping the air pressure between 0.5 and 0.6 should refer to the pressure on the air storage tank. If this is the case, it is necessary to change the loading and unloading pressures set by the air compressor. For example, the loading pressure is set to 0.52Mpa, the unloading pressure is set to 0.62Mpa, and there is a knob at the air outlet, which can only be adjusted after being pulled out. And there's a barometer next to it to see the air pressure. If the debugging knob is gone, a triple piece can be added at the air outlet.

Air compressor is the basic product of industrial modernization, which has the meaning of full pneumatic in electrical and automation. Air compressor is the main component of electromechanical air bleed source device and the core equipment of pneumatic system. It is a device that converts the mechanical energy of prime mover (usually motor) into gas pressure energy, and it is a pressure generator of compressed air.

The market scale of domestic air compressor industry has increased by more than 8%, and the annual growth rate of 2010-201even exceeds 28%, and the market scale has expanded rapidly. However, in such a huge market, most of the market has long been occupied by foreign-funded enterprises. In 2009, there were nearly 400 air compressor manufacturers in China, of which the number of domestic enterprises was close to 90%, and the total sales revenue was about 6 billion yuan, accounting for 40% of the whole industry. The number of foreign-funded enterprises is close to 10%, and the total sales revenue is about 9 billion yuan, accounting for 60% of the whole industry.