How to remove which pipe on the accelerator of Cadillac xt5?

Disassembly method of Cadillac xt5 throttle: 1. Remove the engine cover with 10mm sleeve first, and then remove the engine cover with 10mm sleeve; Remove the air inlet plastic pipe; 2. Remove the pipe from the air inlet hose again, and loosen the screw near the throttle clamp with an 8mm sleeve; 3. Loosen the screw at the other end and remove the air inlet hose between the air filter and the throttle; 4. Remove the rubber hose of the carbon canister solenoid valve, and clamp the clamp with pliers to remove it. More details are as follows: 1. The throttle valve is an important part of the vehicle, which is located between the air cleaner and the intake manifold. It is a controllable valve to control the air entering the engine, which needs to be cleaned regularly, otherwise it is prone to adverse reactions such as unstable idle speed. 2. There is no strict limit on the frequency of cleaning the throttle, which has a lot to do with car habits and the environment. Clean it when it is dirty, usually around 20 thousand kilometers. 3. When cleaning the throttle, pay attention to the fact that the whole throttle is dirty during disassembly. At this time, never unplug the connecting plug of the throttle. During the whole cleaning process, keep the connecting wire in close contact with the throttle valve. It is best to use carburetor cleaner when cleaning. Carburetor cleaning agent is corrosive to some extent, so it is best to prepare a pair of gloves when cleaning yourself to avoid skin corrosion.