How to Clean Baojun 560 Throttle

Baojun automobile 560 throttle has a certain cleaning cycle time, and buyers can also distinguish whether to clean it according to the situation of the car.

If there is too much grease on the accelerator, it is likely to lead to the acceleration of the automobile engine and the increase of fuel consumption, which is a great distress for riders. What if the throttle is dirty? As long as you clean it, you can get it quickly by going to the 4S shop, but don't you need to go to the 4S shop every time you clean it? Actually, you don't need it. You can win by yourself. Don't forget to initialize.

When cleaning the throttle valve, first apply a little oil on the fixed metal beam ring to prevent the teeth from slipping when disassembling. [1] Remove the metal collar of the plastic hose of the throttle valve. After removing the plastic hose, the left side is the part of the throttle. In the stage of removing the negative electrode of the battery, turn off the starting motor, straighten the hook of the throttle plate, spray a small amount of "carburetor cleaner" into the throttle, and then carefully clean it with a polyester cloth towel or a high-count "unprotected cloth". The deepest part of the throttle valve can be carefully cleaned with the iron clip on the towel.

When cleaning the throttle valve, it is not necessary to disassemble it, but the sealing position of the inlet steam must be cleaned, and the idling motor must be disassembled and cleaned. Borrowing clean and disassembly-free injectors has its own advantages and disadvantages. Generally speaking, the maintenance center proposes to avoid disassembly, which can avoid other unnecessary consumption, such as the safety that the gasket must be disassembled or some other gaskets must be replaced after disassembly, or the buyer's room is delayed by oil leakage and air leakage during the whole disassembly process.

After cleaning, according to the disassembly procedure just now, the throttle valve needs to be initialized gradually after installation. After cleaning the throttle, initialization is required. Because the throttle opening is adjusted on the computer, it has a memory function. Because of the oil pollution in the past, in order to better ensure the air intake and air supply, the computer will automatically adjust the throttle opening to keep the air intake in normal conditions.

Million car purchase subsidy