How to adjust alto throttle cable

The end of the Alto throttle line is tied to the throttle, and there is a fixed pull screw on the throttle, which can be adjusted. After adjustment, it is necessary to check the deflection of the wire rope, and it is best to control it within a suitable range. Too tight adjustment may increase idle speed.

Throttle, also known as throttle valve, refers to the control device that controls engine power (thrust). On the piston aero-engine, the throttle valve controls the opening of the carburetor to control the filling amount of the cylinder, thus determining the output power of the engine. When operating, increase or decrease the throttle according to the road conditions and actual needs. The selected gear should be suitable, so that the engine can run at medium speed and large throttle most of the time to save fuel. When shifting gears, the coordination of refueling, stepping on the clutch and stepping on the accelerator should be coordinated.

The traditional cable throttle is a steel wire with one end connected to the accelerator pedal and the other end connected to the throttle, and its transmission ratio is 1: 1. That is to say, the opening angle of the throttle is the angle we step on with our feet, but in many cases, the throttle should not be opened at such a large angle, so the opening angle of the throttle at this time is not necessarily the most scientific. Although this method is direct, its control accuracy is poor. The electronic throttle controls the throttle opening through cable or wire harness. On the surface, the traditional throttle line is replaced by cable, but in essence, it is not only a simple change of connection mode, but also an automatic control function of vehicle power output can be realized.