Touareg throttle with 43 1.

Adjust the matched channel number to 060 and the five valves to 098. Element x, 43 1 is used to match the throttle of Volkswagen. Valve adjustment matching is only applicable to Volkswagen equipped with electronic throttle engine system, and Santana GLi is not in the matching range. Basic setting: When the ignition switch is turned on, the throttle control unit and the engine control unit can adapt themselves. Basic setting process: the throttle is basically set, and the throttle regulator enters the minimum position from the maximum position during emergency operation.

Cleaning method of throttle valve

First, apply a little oil on the fixed metal beam ring to avoid slipping teeth during disassembly. Remove the metal wire harness ring of the throttle hose. After the hose is removed, the left end is the position of the throttle. Remove the negative electrode of the battery, turn off the ignition switch, straighten the throttle plate, spray a small amount of "carburetor cleaner" into the throttle, and then carefully scrub it with polyester rag or high-spin "non-woven fabric". Deep in the throttle, you can hold the rag and scrub it carefully where your hands can't reach it.

After cleaning, the throttle will be initialized according to the disassembly procedure just now. After cleaning the throttle, it needs to be initialized, because the computer has a memory function when adjusting the throttle opening, because there was sludge blockage in the past. In order to ensure the air intake, the computer will automatically adjust the throttle opening to make the air intake in a normal state.