How to adjust the valve clearance of motorcycle?

I don't know what kind of car you need. I'll write down the steps of adjusting the valve clearance of scooter first:

(1) Remove the air inlet and exhaust valve chamber cover and magneto cover;

(2) Rotate the magneto rotor so that the "T" scribe line on its outer circular surface is aligned with the scribe line on the shell, and the piston should be at the top dead center of the compression stroke at this time;

(3) Carefully insert the feeler gauge with the specified valve clearance value into the valve clearance and pull it back and forth. If you feel a little resistance, the gap is appropriate.

(4) If the clearance is not suitable, loosen the adjusting nut, turn the adjusting screw with a small wrench, and pull the feeler gauge to check the clearance. After the clearance is appropriate, tighten the adjusting nut again, and the clearance may change, so retest again with a feeler gauge.