How to match the throttle of Chevrolet Spark

The matching method of automobile throttle is as follows:

1, connect the vehicle control computer module and VCDS 10.6.3 software with the data line of 5053, enter the next "engine" module, enter "match", enter "000" in the channel number, and then click OK (the purpose of this is to clear the memory data of the original ECU about the throttle); Return to "Basic Settings", enter "060" in the channel number, and click "OK". The data displayed on the right will complete the throttle matching.

2. Different from the first one, the step of entering "000" in the channel number is omitted, and "060" is directly entered in the channel number in "Basic Settings".

3. The driving computer has automatic learning function, so don't worry too much about essential oil. Disconnect the negative power cord of the battery again, and the ECU is powered off. Then connect the battery negative power cord, and there will be sparks. In general, the throttle can also be matched.

4. In the process of vehicle matching throttle, the system automatically matches, generally without manual intervention. Secondly, in the process of matching deflation, we should pay attention to ensure that the data line must be connected normally and not disconnected at will, so as to avoid data loss and unsuccessful matching.