How to sketch scotch tape?

What are the basic knowledge of sketch introduction? Transparent glue is often used to fix the four corners of sketch paper on the drawing board, or to fix all four edges of sketch paper. Let's learn the basics of sketch: the use of transparent tape for sketch.

Why can transparent glue stick things? Of course, it is because its surface is coated with a layer of glue. The earliest adhesives came from animals and plants. In the19th century, rubber was the main component of adhesives. In modern times, various polymers are widely used.

Let's explain the method of fixing the four corners first:

Use steps of transparent adhesive

1, first pull out a short section and put it on the corner of the sketch paper to prevent the tape from being pulled too long.

2. After determining the length, gently cut off the lead with a utility knife.

3. Press back and forth with your fingers, so that the adhesive tape tightly fixes the corners of the sketch paper.

4, according to the above method, and so on. After the four corners are fixed, the sketch paper will be tightly fixed on the drawing board.

Steps of using long section of transparent adhesive tape

1, according to the previous method, stretch the scotch tape and measure the scale along the edge of the sketch paper.

2. If the sketch paper is long, you need to hold one side of the paper with the other hand, so that the scotch tape and the edge of the paper can be aligned neatly.

3. After pasting the edge of the sketch paper, carefully cut off the tape head with a utility knife.

4. According to the method in the previous step, stick each edge one by one, and finally fix the sketch paper.

When sketching, you can fix the sketch paper with transparent tape to make a texture effect. The general method is: first stick the required scotch tape on the paper, and then draw on the paper with the scotch tape attached. After the work is completed, the transparent tape attached to the drawing paper is uncovered, and the texture effect is produced.