What is the matching channel number of Volkswagen polo throttle?

060。 The matching method enters the engine module, inputs matching, inputs 000 in the channel number, and then clicks OK (the purpose of this is to clear the memory data of the original ECU about the throttle valve); Go back to the basic settings, enter 060 in the channel number, click OK, and the data will be displayed on the right to complete the throttle matching.

The second computer matching method is different from the first one in that it omits the step of inputting 000 in the channel number and directly inputs 060 in the channel number in the basic settings. Manual matching. Automatic matching without manual intervention. The driving computer has automatic learning function. Disconnect the negative power cord of the battery again, and the ECU is powered off. Then connect the battery negative power cord, and there will be sparks.

In general, throttle matching can also be completed. The side lines of the new POLO are simple and to the point, and a straight high waistline runs through the body from the headlights to the rear of the car, still taking a simple route. Compared with the previous generation, the size of the new car has increased to 3970mm, the width has increased by 32mm to 1682mm, the height of the whole car has decreased by 32mm, the wheelbase has been further increased, and the front and rear wheel tracks have been increased by 30mm respectively.

The cup holder of the old POLO is reserved. The new POLO has two card slots on the left partition corresponding to the right cup holder, which can just accommodate the next two high-speed crossing cards, so don't worry about the loss of the cards. At the same time, there is also a storage box under the seat, which can be used to place driving shoes or wet umbrellas and other sundries, which is very practical. (Photo/Text/Photo: Chen Jie 2) @20 19