Where is the obd detection plug of Qingling pickup truck?

The OBD of Qingling pickup truck is plugged in the cover plate on the left side of the main driver's left foot, and there is a decorative plate next to the foot pad. When you take it apart, you can see the OBD socket. OBD is an on-board automatic diagnosis system, which can diagnose the state of vehicles. Read the fault code through the vehicle OBD interface, and then analyze and eliminate the fault code of the vehicle. The repairman can read the fault code through the special instrument of the original automobile factory, which can quickly locate the fault, facilitate vehicle maintenance and greatly reduce the time of manual diagnosis. The following is a concrete introduction of OBD: real-time monitoring of 1 OBD includes EGR, engine, particulate trap, catalytic converter, oxygen sensor, emission control system, fuel system and other systems and components, such as intake manifold pressure, intake temperature, air flow, throttle position, oxygen sensor voltage, fuel pressure and so on. The original intention of 2.2. OBD is to monitor whether the automobile exhaust emission exceeds the standard at any time through the running state of the engine. The general function is to monitor the emission-related components in real time and send the information to the driving computer to judge whether the vehicle is working normally. 3.OBD system will monitor whether the automobile exhaust exceeds the standard at any time from the running condition of the engine. Once the standard is exceeded, a warning will be issued immediately. When the system fails, the fault light or warning light used to detect the engine will light up. At the same time, the powertrain adjustment module (PCM) stores the fault information into the memory, and can read the fault code from PCM through a certain program. According to the prompt of fault code, maintenance personnel can quickly and accurately determine the nature and location of the fault.