How to adjust the time of Dynasidi wall-hung boiler

Run in the off state. First, press the "Winter Mode" and "Reset" buttons at the same time to enter the clock setting state. Adjust the time by "+"and "-",and then press the "power switch" key to confirm.

Conventional use of wall-hung boilers: boilers can be electrified for a long time, especially in winter. If the boiler or heater is full of water, it is necessary to set anti-freezing measures for the boiler and prepare enough electricity and gas to avoid the radiator, water pump, heat exchanger and other parts of the boiler from freezing. Various brands of wall-hung boilers for heating have anti-freezing function. Please refer to the instruction manual for specific operation methods.

Extended data:

The wall-hung boiler must be commissioned once a week to prevent the circulating pump from locking up. After the heating period, the wall-hung boiler and heating system must be filled with water to protect and delay the oxidation and rust inside the system; To ensure that the power supply is normally connected and the circulating waterway is unblocked; The flue can't be disassembled casually;

When the water pressure is lower than 0.5Kg, it will cause domestic hot water to be hot and cold for a while, or it will not work normally. Solution: Open the water replenishing valve of the wall-hung boiler, and increase the internal water pressure by injecting water about 1.5Kg.

Pay attention to the use of wall-hung boilers. Remember to turn off the water supply switch of the wall-hung boiler after the system is filled with water. If you are away from home for a long time, you'd better close the main water supply valve of the wall-hung boiler. It is best to install a drain pipe on the boiler safety valve to prevent the boiler from being damaged due to excessive pressure.