What is the solution of atsl gearbox jitter?

The problem of atsl gearbox jitter can be solved by changing the gearbox and the gearbox oil. During routine maintenance, you can properly clean the accelerator of the vehicle and check whether it is necessary to replace the spark plug. More relevant information is as follows: Note 1: There are generally four reasons for gearbox jitter, namely clutch failure, gearbox gear damage, gearbox oil deterioration, and automatic gearbox oil circuit or electronic control part failure. Clutch is the only power transmission component between engine and gearbox. If the clutch of the car is damaged, the gearbox of the car will shake. It is possible that the gearbox gear is damaged and the gearbox gear is badly worn, causing jitter. If the oil circuit of the gearbox is blocked or the electronic control part is abnormal, it will affect the normal work of the automatic gearbox and may eventually lead to gearbox jitter. Note 2: The transmission oil of most models belongs to maintenance-free products, but the lubricating oil is difficult to violate its working characteristics. It is inevitable that the performance will decline after working in high temperature environment for a long time. Therefore, the performance attenuation of gearbox oil is the key factor leading to gearbox jitter. It is also relatively simple to improve the jitter caused by oil and water, as long as the gearbox oil is changed, it can be improved considerably.