How to remove the Audi a6 throttle? Audi a6 throttle disassembly.

Audi A6 cleaning throttle disassembly method: After loosening the screw, hold one end of the hose with both hands and push it backwards, and the hose will be removed. Audi A6 hose may not be easily disassembled or installed firmly, so it is not easy to disassemble. Don't pull hard, it is easy to damage the hose. You can try to twist left and right at the same time, and then retreat after the whole is loose. Audi A6 can see the throttle after pulling out the hose. At this time, the periphery of the throttle is generally not dirty, but the inside is really dirty. To see the situation inside, you need to unscrew the key door and turn on the power of the vehicle, but it can't get on the bus. As soon as another colleague stepped on the gas pedal, it started. At this time, you can clearly see that there will be brown dirt inside the throttle. Some roadside repair shops and even some 4S shops will directly clean the accelerator with a cloth dipped in cleaning agent in this state. If our throttle is not dirty, this method is ok, but if the throttle is dirty, such cleaning is obviously not thorough enough, because the area that can be cleaned simply by reaching in is very limited. Of course, don't spray it directly on the accelerator, which is a safety hazard. After the vehicle is started, the back pressure in the process of oil collection is likely to push out the sprayed liquid. The correct procedure should be to completely remove the throttle and clean it. There will be a plug next to the throttle, which needs to be pulled out before removing the throttle. For vehicles that don't unplug frequently, the plug may be tight and difficult to unplug. At this time, we can pry open around the plug with the help of a small screwdriver, and it is easy to remove it after the whole is loose.