Modern famous figures how to disassemble the throttle and how to match the throttle.

Modern disassembly method of throttle valve: remove the joint between air pipe and air cleaner box, pliers, 2. Remove crankshaft ventilation pipes T20, 3. Remove the air cleaner box, break it by hand, and then clean the upper part of the throttle valve. If you want to clean it thoroughly, please remove the four screws and the throttle. Name map throttle matching method: manual matching: when the key of ignition switch is turned on and off for many times, the on-board computer will delete the memory of crude oil door, store the data of new throttle, hit the vehicle, and the vehicle runs normally, thus completing the matching. Power-off matching: After replacing the throttle, disconnect the battery cathode and wait for one minute before installation. In this process, the original memory of the on-board computer will be erased, the factory settings will be restored, and the vehicle will start to run normally and the matching will be successful. Diagnostic instrument matching: After changing the throttle, you can use the special diagnostic instrument for automobiles to match. After entering the system, select the action test and click the adaptive value reset to zero. Do this several times in a row, and the vehicle will start running normally, indicating that the matching is successful.