BYD G5APS light is on, so it can't be started. What happened?

Maybe you left it for too long, and the oil between the piston ring and the cylinder wall flowed down, resulting in insufficient compression pressure and failure to start it. If this is the case, there is no need to go to the repair shop for inspection. It's best to start the car every day in the future, and even if it doesn't open, let it run to check the working conditions of each system!

It is best not to light it immediately when it is started for the first time in the morning. Turn the key to ACC position and let the fuel pump work for a while before starting (stay for about 5- 10 seconds). This is to ensure the fuel pressure.

3. When the battery voltage is insufficient, the horn and lights can be turned on, but the starter can't be brought up. Before ignition, the battery light will light up as long as the key is in the ON position. Low battery voltage; Specifically, four. Confirm the oil quality of the added gasoline; Check whether it is caused by carbon deposition; If driving around 20,000 KM, check and clean the throttle; Detecting an ignition switch; Test and detect starters, gasoline pumps, sensors, etc.