Disassembly of Modern Main Throttle

Disassembly steps of modern leading thermostat: 1, turn off the engine and other coolant temperatures to return to normal to prevent burns; 2. Prepare a suitable container and put it under the car to receive the overflowing coolant; 3. The thermostat is located at the water outlet on the engine and below the generator, so it is necessary to remove the generator first; 4. Then start to dismantle the water pipe at the outlet. At this time, be careful about spraying the coolant, and slowly loosen the screw to let all the coolant overflow; 5. After removing the water pipe, you can see the thermostat body, which is surrounded by scale. After cleaning, put it into a new thermostat, and then you must apply sealant and install a return pipe to prevent the coolant from leaking; 6. Reset the newly removed generator, add new coolant and check the engine operation, and you're done.