How to install the timing belt of Buick Excelle 1.6l engine?

1. Align the timing mark on the crankshaft timing gear with the notch at the bottom of the rear timing belt cover.

2. Align the timing mark on the camshaft timing gear.

3. Install the timing belt.

4. Install the right engine mount bracket.

5. Use J42492-A to turn the water pump clockwise.

6. Turn the water pump clockwise until the pointer on the adjusting arm of the timing belt automatic tensioner is aligned with the notch on the bracket of the timing belt automatic tensioner. ?

7. Tighten the fixing bolts of the water pump.

8. Turn the crankshaft clockwise for two turns with the crankshaft pulley.

9. Loosen the fixing bolt of the water pump.

10. Turn the water pump with J42492-A until the pointer on the adjusting arm of the timing belt automatic tensioner is aligned with the pointer on the bracket of the timing belt automatic tensioner. ?

1 1. Tighten the fixing bolts of the water pump. Tighten the water pump fixing bolts to 10 [newtonm] (89 lb in).

Remove the crankshaft pulley bolt.

13. Install the front upper and front lower timing belt covers.

14. Install the front upper and front lower timing belt cover bolts.

Install crankshaft pulley.

Install the crankshaft pulley bolt. Tighten the crankshaft pulley bolt to 95 [newtonm] (70 lb ft), and then tighten it by 30 degrees plus 15 degrees.

17. Install the serpentine accessory drive belt. Refer to 2. 1.3.6 Power Steering Pump Drive Belt Replacement in Power Steering System.

18. Install the fender of the right front wheel.

Install the right front wheel.

20. Install the air cleaner housing.

2 1. Install the air cleaner housing bolts.

22. Connect the outlet hose of the air cleaner to the throttle body.

23. Connect the crankcase forced ventilation fresh air pipe to the outlet hose of the air cleaner.

24. Connect the air temperature sensor connector to the outlet hose of the air cleaner.

25. Connect the negative battery cable.