How to remove the small water pipe on the cover of the big dipper cylinder

According to the following steps, remove the small water pipe on the cylinder cover of the Big Dipper.

1. First, you need to prepare necessary tools and materials, such as wrenches, torque wrenches and rubber washers.

2. Before removing the water pipe, it is necessary to remove other components on the cylinder head, such as intake pipe and spark plug, for easy operation.

3. Find the joint of the small water pipe, usually on the side or top of the cylinder head. You can loosen the screw gently with a wrench or torque wrench, and then gently unscrew the small water pipe from the joint.

4. When removing the small hose, be careful not to use too much force to avoid damaging the joint or the small hose itself.

5. After removing the small water pipe, you can clean and check whether there is scale or blockage inside the small water pipe. Cleaning is necessary.

6. When replacing small water pipes, attention should be paid to selecting appropriate specifications and models to ensure good sealing of joints and avoid water leakage or water leakage.