How about Volkswagen engine oil? Do you want to add?

What about Volkswagen burning engine oil and how to repair it?

First of all, you have to confirm the reason for burning oil. There are two main reasons for burning engine oil. First, there are problems with accessories, waste gas valve, valve oil seal, cylinder pulling and insufficient cylinder pressure. Second, the oil circuit is not cleaned for a long time, the antifreeze is not replaced in time, the service life of the oil is too long, and the piston ring is stuck. The common situation is that the piston ring is stuck.

I suggest you try this:

In order to protect the engine, prolong the service life of the engine and reduce the friction resistance between the piston ring and the cylinder wall, an oil film will be formed on the cylinder wall, and some oil films will burn with the high-temperature combustion gas, so the oil loss is higher than that of the manufacturer to prolong the service life of the engine, resulting in oil burning.

Find the cause of burning oil:

The main reasons are two aspects, one is accessories, the other is unclean oil circuit, carbon deposition and piston ring stuck. I suggest you confirm the cause of burning engine oil first, so as to solve it in a targeted way. First check the accessories, mainly the valve cover and waste gas valve. They are one. When you check, just check together. Then, measure the cylinder pressure to see if there is piston ring matching and cylinder pulling. If there is no problem, you can basically eliminate the failure of accessories, that is, oil burning caused by piston ring sticking.

Stuck starts with the oil circuit. The oil temperature is 1 10 degrees. The high temperature caused by the long-term uncleanness of the oil circuit keeps the oil at 120 degrees or even higher for a long time, so that the oil will be exhausted ahead of schedule and the holes in the oil ring are small. The oil in it will dry if it is left for a long time. A cylinder of 5000 kilometers a liter of oil. At this time, the working conditions of other cylinders will also begin to deteriorate. Soon, the four cylinders got stuck. To solve the problem, we must start with the root oil circuit, which is the way to get rid of the root.

Solution:

Overhaul the engine:

If the vehicle is overhauled, the depreciation of the vehicle is serious, the cost is high, and the later running-in is troublesome.

Nondestructive repair:

Be sure to check the accessories first. Under the premise that there is no problem with the accessories, according to the operation requirements, the problem of burning oil can be solved by using Siyoupu piston ring release agent.

Referring to other riders, you can burn engine oil in only one way, not to mention dry ice, without disassembly and inspection, without soaking the cylinder, so that the car can be done without delay and detour. I hope this helps.

Method for quickly solving engine oil combustion