Dongfeng Nissan Loulan Throttle Matching Method

Loulan's throttle matching method, first turn the key to the power gear, don't start the car, that is, turn off the engine. After standing for about 10 second, quickly press the accelerator pedal to the bottom. Be sure to step on the accelerator to the end. 15 seconds later, quickly lift the pedal, then close the key door, unplug the key, and let it stand for about 15 seconds to start the car normally. Matching is complete.

Loulan throttle matching method:

1. Check the working parameters of the parts on the throttle body; Turn on the ignition switch. Generally, the opening of the throttle position sensor is between 17% and 19%, and the voltage is between 0.85% and 0.95V V V. After the engine is started, the idle speed will definitely be high.

2. Turn on the ignition switch and use the HDS detector to enter the engine system;

3. Select the "Check" function;

4. Select the "ETCS" item, step 1, test the throttle position sensor according to the prompt, and step 2, perform the matching function of the throttle position sensor;

5. Turn off the ignition switch after performing the above functions;

6. Start the engine and run at normal idle speed.

Million car purchase subsidy