Where is the V 19 engine made?

The V 19 engine is produced by Mianyang Engine Factory of Brilliance Group located in Shenyang, Liaoning.

V 19 engine belongs to the first domestic engine with 2v _ CBR technology. V 19 engine is jointly developed by domestic and foreign enterprises. Comprehensive use of CBR, CVVT, internal EGR, electronic throttle and other technologies. It can effectively reduce the pumping loss at medium and low speeds and effectively reduce the fuel consumption at part load. The economy is obvious, and the power will be greatly improved.

Extended data:

Matters needing attention in using V 19 engine:

1, the engine oil with appropriate quality grade must be used, which is the key to ensure the normal operation of the engine.

2. Change the oil regularly or according to the quality. After the engine oil of any quality is used for a certain mileage, some physical and chemical indexes will change, which will bring harm to the engine and lead to failure. Therefore, oil should be changed regularly according to the oil change situation.

3. The fuel must be clean. There are many impurities in fuel, which will accelerate the wear of electric fuel pump and reduce its service life. In addition, unclean fuel will also lead to the blockage of fuel filter and injector, which will affect the fuel supply pressure and normal fuel injection and reduce the engine performance.

4. Replenish the electric fuel pump of the fuel EFI engine in time to meet the requirements of sufficient fuel and stable working pressure of the injection system. Most fuel pumps are installed in oil tanks immersed in oil to cool the oil pump motor, reduce noise and prevent air resistance. When the fuel in the fuel tank is insufficient (some warning lights are flashing), the fuel should be replenished in time to prevent the fuel pump from burning out.

5. Regularly cleaning the fuel system The fuel system of the air intake system is not clean, which will cause a series of faults such as blocked oil circuit, lax valve closing, poor atomization of fuel injection, insufficient oil supply and low oil supply pressure, which will directly affect the normal work of the engine.