How to clean the floor heating pipe at home?

Cleaning the floor heating pipes at home by yourself:

First, close the water inlet valve and water outlet valve of the floor cleaning and heating pipeline, install a water pipe at return pipe head, close all water diversion valves, only one valve is opened, open the water inlet valve and water outlet valve of the heating system, rinse for a period of time, then open the water diversion valves in turn, and then clean other valves and pipelines.

1. First of all, we have to turn off the inlet and outlet water valves and separate our own heating from that of the whole building, so that we can clean up conveniently. Usually the valve is perpendicular to the pipeline in the horizontal direction, that is, closed.

2. Install water pipes at the blockage in return pipe. If you have good practical experience, you can install it yourself. If you feel that your skills are not good, you can go to a pipeline cleaning company. This equipment can also be installed at the end of heating. When heating, because there is too much water in the water pipe, it will cause some trouble, but this is not a big problem.

3. Close all the water diversion valves, only one valve is open, and then pipe it to your own sewer.

4. Open the water inlet valve of the heating, and then unscrew the faucet, hot water will flow out, and there will be a lot of dust. What is cleaned in this way is the open shunt.

Rinse for a while until the water becomes a little clear. In this way, they can open the water diversion valves in turn, and then clean other valves and pipelines, thus completing the cleaning of the floor heating pipeline.

6, you can also clean the filter, there are a lot of stains, if it is too much trouble, don't wash it.