How to disassemble emgrand gl throttle valve?

Emgrand GL (view transaction price | model details) How to remove the throttle? I'll answer for you.

Whether it is manual or automatic, disconnect the battery before removing the accelerator of Emgrand gl, that is, remove the negative electrode. If there is a warm water pipe coming in and out, if it is extremely blocked after being removed, it is necessary to check whether the coolant is missing and replenish it in time after being removed.

1. Remove Emgrand gl throttle cable (throttle cable).

2. Remove the intake manifold from the throttle of Emgrand gl.

3. Disconnect the throttle position sensor harness.

4. Disconnect the harness of the idle motor.

5. Remove the positive crankcase ventilation hose.

6. Remove the Emgrand gl throttle body to preheat the intake and exhaust pipes.

7. Remove the four fixing bolts.

8, remove the fixed bracket bolts

After completing the above steps, you can remove the Emgrand gl throttle body as a whole.

Emgrand gl throttle matching method:

1, turn the key to the power gear first, and never start the car, that is, turn it off.

2. After standing for about 15 seconds, quickly step on the accelerator pedal to the end, be sure to step on it quickly, hold on for 15 seconds, and then quickly lift the pedal.

3. Then close the key door, take out the key and let it stand for about 15 seconds.

4. Start the car normally and complete the matching.

Note: A dissatisfaction can be repeated several times.

General comment: the market with a price of 80,000 yuan has always been the main battlefield of independent brands. Some products of joint venture brands will enter this market to participate in the competition after preferential treatment, but the cost performance is still high for independent brands. Emgrand GL is one of the best, with good quality and reputation.

The above is the knowledge about "How to Disassemble Emgrand gl Throttle" compiled by Auto Network. I hope I can help you.

@20 19