Revit20 16 stair handrail corner connection

Today, we will share the corner connection skills of REVIT stair handrail. Usually when we draw stairs, the corner connection of the automatically generated handrail must be very tangled, either with height difference or broken. As shown in the figure below:

A common method you may use is to stagger the stair risers so that the handrails have enough space to intersect on a plane and let them connect automatically. But this may have some influence on the conventional design itself. Here, Bian Xiao of the Silk Road shares a little skill with you, and let's see how to realize its relatively good connection form.

First, edit the automatically generated handrail. At the corner of its rest platform, we choose the middle path and make the following settings.

And then it's over You can see that the corner connection is perfect. The plane and elevation are also fine.

Everything is done in the same way between the two floors, but there are still some tricks. Here we independently create and edit a handrail with a small corner, as shown below.

Then set the longest path as shown above, set it according to the slope, and customize the debugging to 150. Why should I set it to 150 here? Because this is the height of a kicking surface. Then confirm and complete. This basically meets the requirements of handrail connection. If every floor has such a demand, copy it.

I hope our answer can help you.