How to open Citroen C6 engine compartment, Citroen C6 engine compartment cleaning tutorial

202 1 Citroen C6 engine compartment opening method;

1. First find the handle switch on the left side under the driver's instrument, and pull the unlock handle, and the engine compartment of the vehicle will pop open a small gap;

2. Go to the front of the car and put your hand into this gap, turn the lock to the right and lift the engine compartment cover at the same time;

3. Untie the safety buckle of the engine hood, support the engine compartment support rod, and then put one side of the support rod into the support notch of the hatch cover to support the engine compartment cover. (If equipped with hydraulic support, manual support is not required)

As for closing the engine compartment, it is much easier than opening it. Hold the hood and lower the support rod. If your vehicle is equipped with a hydraulic support, there is no need for manual support, and then slowly lower the hood. Finally, put your hand on the front of the engine compartment cover, press it gently, hear the click of the safety buckle, and close the engine compartment.

Cleaning process of Citroen C6 engine compartment

If the car has been driving on the road for some time before cleaning the engine compartment, remember to let the engine cool down first to avoid overheating and scalding during cleaning.

1 Clean the dust and sundries on the surface.

Wipe off the dust and sundries on the surface with a brush first.

2 clean grease

Grease is often produced during engine operation. After a period of time, the grease will be washed away. Spray a special cleaning agent on each part to disintegrate the grease, then wipe it with a towel and slowly clean up those stubborn grease and gaps with a brush.

3 Rinse with water after cleaning.

Remember not to use a high-pressure water gun when flushing, because the water pressure is high when flushing, which may easily lead to deformation of the cooling network, fracture of the wiring harness and water entering the live fire hydrant.

4 spray polishing agent

After washing, dry it with a towel, and then polish the plastic parts in the engine compartment for care.