How to disassemble BYD Song throttle?

BYD Song Throttle Disassembly: Generally, the throttle is fixed with four screws, the upper two screws are easier to disassemble, and the lower screws are awkward. First remove the two screws that are difficult to remove, so as not to increase the difficulty of removing the lower screws because the upper screws have been removed and not fixed. It will be more convenient to remove the screws by hand afterwards, but be careful that the screws fall into the cabin. After removing the four screws, you can remove the throttle, and the exposed pipeline is the air inlet.

BYD Song Throttle Installation: The four screws for fixing the throttle can be screwed by hand first, because the hand is sensitive, so avoid screwing the screws directly with the sleeve and then tightening them with tools. Then plug in the plug, and the installation of the plug needs to be strengthened. After hearing a beep, it means it's fixed. After installing the throttle valve, you can install the hose. There will be two small grooves on both sides of the hose, one large and one small, aiming at the raised marks on both sides respectively. Both ends of the hose should be completely covered. If the installation is difficult, you can twist it left and right. After the concave and convex points at both ends are completely aligned, touch the bottom of the hose by hand to ensure that the lower part is completely nested, tighten the screws on the iron hoop and install the engine decorative cover.