How to initialize the accelerator pedal position?

Initialization method of accelerator pedal position: the accelerator pedal position needs to be initialized. You can set the ignition switch of the car to M position without stepping on the accelerator pedal, and then release the accelerator pedal to start the engine. Seine Electronic Throttle Initialization After replacing the engine control unit, replacing the electronic throttle, repairing the throttle (including cleaning) and coding the engine control unit, the electronic throttle needs to be initialized. The setup steps are as follows:

1. Turn the ignition switch to the M position and hold it for 30 seconds. Don't step on the accelerator pedal;

2. Turn off the ignition switch 15s (the engine electronic control unit records the throttle initialization parameters in EEPROM);

3. Pull out the ignition key.

Note: 15s Turn off the ignition switch, and the ignition switch cannot be turned on again.

Basic Settings of Citroen Elysee Electronic Throttle 1 Electronic Throttle Initialization Procedure After replacing the engine control unit, electronic throttle, repairing the throttle (including cleaning) and coding the engine control unit, it is necessary to initialize the electronic throttle: a) Turn the ignition switch to the "M" position and keep it for 30s. Caution: Do not step on the accelerator pedal. B) Turn off the ignition switch 15s (the engine electronic control unit records the throttle initialization parameters in EEPROM). C) Pull out the ignition key. Note: 15s Turn off the ignition switch, and the ignition switch cannot be turned on again.

2 Initialization procedure of accelerator pedal position sensor. After replacing the starter electronic control unit and replacing or repairing the accelerator pedal position sensor, it is necessary to initialize the accelerator pedal position sensor: a) Turn the ignition switch to the "M" position without stepping on the accelerator pedal. B) Push the accelerator pedal to the bottom. C) Release the accelerator pedal and start the engine.

Initial setting of Citroen electronic accelerator and pedal position sensor.

(1) electronic throttle setting steps:

1) Turn on the ignition switch;

2) Keep it above 10s;

3) Turn off the ignition switch;

4) Keep 15s, and PCM inputs the electronic throttle initialization parameters.

(2) Initialization method of accelerator pedal position sensor:

1) The accelerator pedal is at rest;

2) Turn on the ignition switch;

3) Step on the accelerator pedal to the end;

4) Loosen the accelerator pedal;

5) Don't start the engine to learn by itself.

After Peugeot 307 cleaned the throttle body, the matching throttle was initialized as follows: Method 1.

1. Turn on the ignition switch to the "M" position (M is the position where many alarm lights on the instrument panel are on);

2. Keep the "M" gear for 30 seconds (don't turn off the ignition switch and don't step on the accelerator);

3. Then turn off the ignition switch 15 seconds (the computer records the throttle initialization parameters in EEP-ROM, which is in the power support stage).

Million car purchase subsidy