How to disassemble the throttle of Nissan Loulan?

The disassembly method of Nissan Loulan throttle is as follows:

Step 1: Prepare tools, a 10 small wrench (remove the battery terminal), a large Phillips screwdriver (remove the air inlet elbow) and a T30 internal wrench (remove the throttle).

Step 2: Remove the throttle inlet elbow.

Step 3: Unplug the throttle harness plug.

Step 4: Remove the throttle body.

There are two ways to clean the throttle. You can remove the throttle and clean it directly in the car. It is more convenient to remove the throttle valve for cleaning. If the throttle is dirty, please use a toothbrush. Don't spray it on the throttle shaft when cleaning, or the throttle will be broken. When cleaning the car, spray the cleaning agent on the cotton cloth to wipe the throttle, just clean the carbon deposit and finally match the throttle. Just after cleaning, the idle speed will be high for a while.

When cleaning the throttle valve, it is not necessary to disassemble it, but it is necessary to clean the sealing part of the inlet steam. Idling motor must be removed before cleaning. Cleaning the nozzle and avoiding disassembly have their own advantages and disadvantages. Generally speaking, the maintenance station suggests avoiding disassembly and cleaning to prevent other unnecessary waste, such as replacing the sealing ring or installing other gaskets after disassembly, or leaking oil and gas during disassembly and assembly, which will delay the owner's time.

After cleaning, the throttle will be initialized after installation according to the procedure just removed. After cleaning the throttle, initialization is necessary, because the computer has a memory function when adjusting the throttle opening, because there was sludge blockage before. In order to ensure the air intake, the computer will automatically adjust the throttle opening to keep the air intake in a normal state.

Million car purchase subsidy