What is the reason why Toyota Camry 2.5S will tremble when it is opened to 40 ~ 60?

Hello, 12 Toyota Camry 2.5S will shake when driving to 40 ~ 60, for the following reasons:

1, this situation is because the clutch is a bit stuck and worn. Only when it is not completely cut, will your gearbox shake when it receives instructions from the engine. You can go to the repair shop to check the wear of the clutch pressure plate.

2. Shift is the abbreviation of "operation method of gear lever". In the long-term driving process, its name has been circulated by people because of its simplicity and directness. It is used frequently. The proficiency of operation directly affects the safety of people's driving.

Step 3 add necessities. Before shifting gears, you should press the accelerator pedal smoothly according to the road and traffic conditions, and gradually increase the speed. This process is called rushing. When the vehicle speed is suitable for shifting to a higher gear, immediately lift the accelerator pedal, press the clutch pedal, and move the gear lever to the neutral position; Immediately lift the clutch pedal quickly and press it again, at the same time shift the gear lever to a higher gear, and then slowly press the accelerator pedal while lifting the clutch pedal, so that the car can continue to run smoothly. According to the situation, use the same method to shift to a higher gear.

4. The key to smooth shifting is the size of the car, and the distance of the car should be determined according to the level of the gear. The higher the gear, the longer the distance between cars. When rushing the car, the accelerator pedal should be firmly stepped and lifted at a medium speed.

5. When shifting gears, after shifting to a higher gear, the clutch pedal will be quickly lifted to the semi-linkage position, and then slowly lifted after a short pause, so that the power can be transmitted smoothly and the "forward rush" of the vehicle after shifting gears can be avoided.

6. Add timing. When the car is driving, as long as the road and traffic conditions permit, it is necessary to shift into a higher gear in time. Be sure to speed up the car before shifting gears to ensure that there is enough power for the car to run smoothly after shifting gears. If the vehicle speed is too low, it will cause insufficient power and shake after shifting; If the time is too long, the engine will run at high speed for a long time, which will aggravate wear and reduce economy. Therefore, the car should be properly rushed and blocked in time. The timing of upshifting depends on the sound, speed and power of the engine. If you step on the accelerator after gear shifting, the engine speed drops and the power is insufficient, indicating that the timing of gear shifting is too early.