How to discharge automobile carbon? Is it effective to step on the accelerator with big feet?

How to discharge automobile carbon? Only clean, want to discharge naturally, that's really thinking too much. From the appearance of automobile to the continuous improvement of automobile engine technology for so many years, there is still no way to completely solve the problem of engine carbon deposition. As far as our daily driving is concerned, it is basically impossible to discharge the carbon deposits. It can only be said that some carbon deposits will be reduced, or a small part will be discharged naturally.

All along, we often hear that your car has carbon deposits and needs cleaning, especially when it is being maintained in a 4S shop, we are often advised to clean the carbon deposits. Never heard the maintenance master say that carbon deposits can be discharged. In fact, cleaning is the most effective way to remove carbon deposits.

Besides, the way of stepping on the accelerator with big feet is that the engine throttle is bigger, the fuel injection is more, and the engine speed is higher. If carbon deposition is to be discharged, it can be said that the effect is minimal. Some people will say that with a large throttle and high speed, the exhaust volume will definitely increase, and if the air volume is large enough, it can also blow away some carbon deposits.

In fact, the formation of carbon deposition is accumulated over time, not at one time. In the process of its formation, it has experienced various working conditions of the engine. It can be said that the big foot slammed on the accelerator and had no effect on the discharge of carbon deposits. Blow away a little floating dust.

If gasoline is not burned sufficiently, it will adhere to the valve surface, piston surface and spark plug. At a certain temperature, colloids, carbides and nitrides in gasoline components remain for a long time, mainly carbides, and gasoline combustion is mainly carbides, forming so-called carbon deposition.

Simply put, as long as the engine uses fuel, it will produce carbon deposit in the process of burning fuel to do work, which is inevitable. For a simple example, natural gas, known as clean fuel, will produce water after burning, but we find that the bottom of the pot will still have a black layer after being used for a long time. In the process of combustion, there will inevitably be some various chemical reactions, plus some impurities in the air, thus producing some other substances.

Then, the most direct way to remove carbon deposits from cars is cleaning. When the carbon deposit is not particularly serious, it needs to be cleaned up. Throttle, intake manifold, cylinder and other places where carbon deposits are produced can be effectively cleaned by using some corresponding special cleaning agents and removing them at the same time.

Then, some people say that using fuel additives can clean up carbon deposits. It doesn't have much effect, and some manufacturers' additives don't say that they are used to clean up carbon deposits, just to change the combustion effect and reduce some carbon deposits. In the daily use of vehicles, what we can do is to reduce the generation of engine carbon deposits, and there is no specific way to discharge carbon deposits.