Wuling Light 6376 Throttle Fault

First, the trouble code of your ECU was not cleared when you repaired the car; The original fault code is still in the ECU, and when the car works again, the ECU cannot correctly judge the working state of the sensor.

Second, there is a phenomenon that non-original ECU cannot read it; The ECU will classify this as a fault problem and give an alarm.

Third, the reasons for the damage of the throttle sensor: the voltage is too high, the intake pressure of the throttle valve is higher than the working value and uncertain factors.

Fourth, poor line contact. Check the interface of each line.

5. If you troubleshoot the ECU yourself, you can loosen the negative grounding wire of the battery for a period of time to let the ECU discharge naturally, but this will have the defect that the original data of the ECU is lost; It's better to use the car fault code reader to eliminate it, and then take a taxi to see if the fault light is on again. If yes, replace the sensor. Don't break it as soon as you hear it It's also money ~! Right ~! Hmm. How interesting

I hope I can help you. If you don't understand anything, you can reply to me and I will give you a detailed answer.

Hope to adopt thank you!

CHX<Word >

20 12. 10.29 09:42