Trouble shooting of e 1 wall-hung boiler

Wall-hung boiler is a common equipment for household heating, but sometimes there are some faults, such as the common E 1 fault. The fault of E 1 usually indicates the gas control fault of the water heater and needs to be dealt with in time.

Treatment method:

1. Check the power supply: insufficient power supply or short circuit of the power cord of the wall-hung boiler may lead to E 1 failure, so it is necessary to check the power supply and circuit connectivity.

2. Check the throttle: A throttle failure may also lead to E 1 failure. At this time, it is necessary to check whether the throttle is blocked or stuck, and adjust or replace it after confirming that there is no problem.

3. Check the flame monitor: The flame monitor is usually installed in the combustion chamber of the water heater. If it fails, the equipment will not work normally, resulting in E 1 failure. At this point, it is necessary to check whether the flame monitor is clean or replace it with a new device.

4. Check the gas supply problem: The gas supply problem may also lead to the failure of the wall-hung boiler E 1. If the gas pipeline is damaged or has other problems, it needs to be cleaned or replaced to ensure the normal supply of gas.

In a word, to deal with the E 1 fault, it is necessary to carefully check all the components and systems of the wall-hung boiler, find out the problem, and then take corresponding treatment methods. If you are not familiar with the maintenance details of the wall-hung boiler, it is best to ask professional technicians to carry out maintenance.